How to make a stylish wool mattress in just 15 minutes

I love wool, and I love making my own wool blankets.

And now, thanks to a little DIY sleuthing and some fancy materials, you can make a comfortable and durable wool mattress that will last for months without a single scratch.

I’ll let my yarn-loving husband, Andrew, show you how to make his own wool mattress.

The bed is actually made from a combination of recycled cotton, wool, acrylic fibers and polyester, which is then spun into a unique blend that allows it to stretch over a mattress.

Andrew’s DIY mattress will be a fantastic addition to your bedroom, as it will provide a great way to relax after a hard day at work.

The fabric used in Andrew’s mattress is called omni-wool.

This fabric is not only lightweight, it’s also water-resistant.

This is a great option for people who live in hot and humid climates.

It also makes a great base for making a wool blanket.

We will be using a combination that will allow us to create a unique bed cover.

I’ve found it really hard to find a great fabric for the covers, so I’ll be using an acrylic-polyester blend for this one.

It’s also made from acrylic, which makes it waterproof and lightweight, as well as being environmentally friendly.

The next step is to create the mattress cover.

To do this, I started with a few staples.

First, I used a pair of scissors to cut a small slit in the middle of the fabric.

Then, I put a bit of acrylic paint on the piece of fabric.

Next, I placed a piece of plastic wrap over the slit.

I then cut a piece out of polyester.

The end result looks something like this:This was a bit tricky because the polyester is a bit sticky and doesn’t quite hold the acrylic paint.

I had to use a little bit of tape to hold the polymer to the acrylic and the paint.

Next I rolled the pieces of fabric and tape together with a couple of scissors.

I used the scissors to carefully cut the seams of the polymers and the plastic wrap to fit the holes.

Next, I carefully used a couple more scissors to peel the plastic back off the piece and reassemble it.

This was the best part.

I was able to get everything together without any problems.

Now that the cover is assembled, I just need to cut out the sheets and cut the fabric on top of them.

After that, I simply used my scissors to attach the cover to the mattress.

The final step was to put the covers on.

I’m using a pair to fit on the sides of the mattress, but I would love to see what you can come up with with!

The finished product looks like this, with the covers attached to the bedside.

You can see that the seams are made with a little plastic wrap.

I love this material.

You can also see the polystyrene backing on the mattress covers.

The finished covers look just as good as they did the first time.

I like to use these covers for both my bedroom and my work room.

The cover should be perfect for a bed of any size.

You’ll want to cut the edges to be as close to a square as possible.

The polystyramers help to provide some stability and keep the covers in place.

The fabric will be durable and will last quite a while.

I can’t wait to see how much more I can make with this material!